Toyota Prius 2011 Owner'S Manual Download Page 95

Page: 95 / 651

1-3. Opening, closing and locking the doors and back door

PRIUS_U (OM47685U) DVD

Locking the front doors from the outside without a key

Move the inside lock button to the lock position.

Close the door.

The door cannot be locked if the “POWER” switch is in ACCESSORY
or ON mode, or the electronic key is left inside the vehicle.

Depending on the position of the electronic key, the key may not be
detected correctly and the door may be locked.

Rear door child-protector lock

The door cannot be opened from
inside the vehicle when the locks
are set.

These locks can be set to prevent
children from opening the rear
doors. Push down on each rear
door switch to lock both rear
doors.

STEP

Summary of Contents for Prius 2011












































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Prius 2011

Reviews:

Related manuals for Prius 2011

Brands by name

Popular brands

Toyota Prius 2011, Owner'S Manual

Search results

Summary of Contents for Prius 2011

Reviews:

Related manuals for Prius 2011

Brands by name

Popular brands