Toyota Prius 2011 Owner'S Manual Download Page 300

Page: 300 / 651

274

2-5. Driving information

PRIUS_U (OM47685U) DVD

CAUTION

Driving with tire chains

Observe the following precautions to reduce the risk of accidents.

Failing to do so may result in the vehicle being unable to be driven safely,
and may cause death or serious injury.

Do not drive in excess of the speed limit specified for the tire chains being
used, or 30 mph (50 km/h), whichever is lower.

Avoid driving on bumpy road surfaces or over potholes.

Avoid sudden turns and braking, as use of chains may adversely affect
vehicle handling.

Slow down sufficiently before entering a curve to ensure that vehicle con-
trol is maintained.

NOTICE

Repairing or replacing snow tires

Request repairs of and obtain replacement snow tires from Toyota dealers.

This is because the removal and attachment of snow tires affects the opera-
tion of the tire pressure warning valves and transmitters.

Fitting tire chains

The tire pressure warning valves and transmitters may not function correctly
when tire chains are fitted.

Summary of Contents for Prius 2011












































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Prius 2011

Reviews:

Related manuals for Prius 2011

Brands by name

Popular brands

Toyota Prius 2011, Owner'S Manual

Search results

Summary of Contents for Prius 2011

Reviews:

Related manuals for Prius 2011

Brands by name

Popular brands