Toyota Prius 2011 Owner'S Manual Download Page 205

Page: 205 / 651

179

2-1. Driving procedures

When

riving

PRIUS_U (OM47685U) DVD

: Follow the warning message displayed.

CAUTION

To avoid an accident

Do not hang objects on or attach objects to the shift lever.

Doing so may cause the shift lever to move and the shift position to change.

For the shift lever

Do not remove the shift lever knob or use anything but a genuine Toyota shift
lever knob. Also, do not hang anything on the shift lever.

Doing so could prevent the shift lever from returning to position, causing
unexpected accidents to occur when the vehicle is in motion.

Alarm

Situation

Correction procedure

Interior alarm

beep sounds

and warning

message

If the driver’s door is
opened while the transmis-
sion is in “N”, “D” or “B”.

Push the “P” position
switch.

The driver attempts to
drive by depressing the
accelerator pedal while the
shift position is in “N”.

Release the accelerator
pedal and shift the shift
position to “D” or “R”.

Summary of Contents for Prius 2011












































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Prius 2011

Reviews:

Related manuals for Prius 2011

Brands by name

Popular brands

Toyota Prius 2011, Owner'S Manual

Search results

Summary of Contents for Prius 2011

Reviews:

Related manuals for Prius 2011

Brands by name

Popular brands