Toyota Prius 2011 Owner'S Manual Download Page 503

Page: 503 / 651

480

4-3. Do-it-yourself maintenance

PRIUS_U (OM47685U) DVD

After a fuse is replaced

If the lights do not turn on even after the fuse has been replaced, a bulb
may need replacement. (

→

P. 481)

If the replaced fuse blows again, have the vehicle inspected by your
Toyota dealer.

If there is an overload in the circuits

The fuses are designed to blow, protecting the wiring harness from damage.

CAUTION

To prevent system breakdowns and vehicle fire

Observe the following precautions.

Failing to do so may cause damage, and possibly a fire or injury.

Never use a fuse of a higher amperage rating than indicated, or use any
other object in place of a fuse.

Always use a genuine Toyota fuse or equivalent.

Never replace a fuse with a wire, even as a temporary fix.

This can cause extensive damage or even fire.

Do not modify fuses or the fuse box.

NOTICE

Before replacing fuses

Have the cause of electrical overload determined and repaired by your
Toyota dealer.

Summary of Contents for Prius 2011












































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Prius 2011

Reviews:

Related manuals for Prius 2011

Brands by name

Popular brands

Toyota Prius 2011, Owner'S Manual

Search results

Summary of Contents for Prius 2011

Reviews:

Related manuals for Prius 2011

Brands by name

Popular brands