Toyota Prius 2011 Owner'S Manual Download Page 350

Page: 350 / 651

326

3-2. Using the audio system

PRIUS_U (OM47685U) DVD

Lens cleaners

→

P. 319

MP3 and WMA files

MP3 (MPEG Audio LAYER3) is a standard audio compression format.

Files can be compressed to approximately 1/10 of their original size by using
MP3 compression.

WMA (Windows Media Audio) is a Microsoft audio compression format.

This format compresses audio data to a size smaller than that of the MP3
format.

There is a limit to the MP3 and WMA file standards and to the media/formats
recorded by them that can be used.

MP3 file compatibility

• Compatible standards

MP3 (MPEG1 LAYER3, MPEG2 LSF LAYER3)

• Compatible sampling frequencies

MPEG1 LAYER3: 32, 44.1, 48 (kHz)

MPEG2 LSF LAYER3: 16, 22.05, 24 (kHz)

• Compatible bit rates

MPEG1 LAYER3: 64, 80, 96, 112, 128, 160, 192, 224, 256, 320 (kbps)

• MPEG2 LSF LAYER3: 64, 80, 96, 112, 128, 144, 160 (kbps)

Compatible with VBR

• Compatible channel modes: stereo, joint stereo, dual channel and

monaural

Summary of Contents for Prius 2011












































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Prius 2011

Reviews:

Related manuals for Prius 2011

Brands by name

Popular brands

Toyota Prius 2011, Owner'S Manual

Search results

Summary of Contents for Prius 2011

Reviews:

Related manuals for Prius 2011

Brands by name

Popular brands