manualshive.com logo in svg

Toyota Prius 2011, Owner'S Manual, Page: 269 / 651

Share
Download
Toyota Prius 2011 Owner'S Manual Download Page 269

243

2-4. Using other driving systems

2

When

 d

riving

PRIUS_U (OM47685U) DVD

LKA (Lane-Keeping Assist)

∗

∗

: If equipped

While driving on a freeway or motor highway that has lane markings, 

this system recognizes the lanes using a camera as a sensor to 

assist the driver with staying in the lane. The LKA system has two 

functions.

n

Lane departure warning function

If the system judges that the vehicle may deviate from its lane, it 
alerts the driver using rapid beeping, indications on the multi-
information display, and a sensory warning

*

 given via the steer-

ing wheel.

*

: A slight steering torque is applied for a short period of time in 

the direction of the center of the lane.

n

Lane keeping assist function

This function will be active when the vehicle-to-vehicle distance 
control mode of the cruise control (

→

P. 221) is set with vehicle 

speed above approx. 50 mph (approx. 75 km/h) and while the 
lane departure warning function is active. When the lane keep-
ing assist function is active, a slight steering torque will be 
applied, to help the driver maintain the vehicle inside the lane.

Summary of Contents for Prius 2011












































































































































































































































































































































































































































































































































































































































































Reviews:

No comments