manualshive.com logo in svg

Toyota Prius 2011, Owner'S Manual, Page: 424 / 651

Share
Download
Toyota Prius 2011 Owner'S Manual Download Page 424

400

3-6. Other interior features

PRIUS_U (OM47685U) DVD

n

Stowing the luggage cover (vehicles with center auxiliary box type A 
only)

n

When not using the luggage cover

Place the cover in a horizontal position.

CAUTION

n

When the cargo hooks are not in use

To avoid injury, always return the cargo hooks to their positions when they 
are not in use.

n

While driving

Do not place anything on the luggage cover. Such items may be thrown 
about and possibly injure people in the vehicle during sudden braking or an 
accident.

n

When the luggage cover is installed

l

Make sure that the rear edge of the cover is laying flat. If the cover is 
installed with the rear edge raised, the view from the rear window may be 
obstructed, which could cause an accident.

l

Make sure that seat belts are not caught up in the luggage cover. If a seat 
belt is caught up in the cover, it may not be able to restrain passengers 
properly.

Remove the side deck boards and 
open the center auxiliary box. 

Adjust the cover so that “TOP” is facing 
up.

STEP

1

STEP

2

Summary of Contents for Prius 2011












































































































































































































































































































































































































































































































































































































































































Reviews:

No comments