Toyota Prius 2011 Owner'S Manual Download Page 125

Page: 125 / 651

1-4. Adjustable components (seats, mirrors, steering wheel)

PRIUS_U (OM47685U) DVD

Mirror angle can be adjusted when

The “POWER” switch is in ACCESSORY or ON mode.

When the mirrors are fogged up (vehicles with outside rear view mirror
defoggers)

Turn on the mirror heaters to defog the mirrors. (

→

P. 300)

CAUTION

While driving

Observe the following precautions.

Failing to do so may result in losing control of the vehicle and cause an acci-
dent, resulting in death or serious injury.

Do not adjust the mirrors.

Do not drive with the mirrors folded back.

Before driving, be sure to extend mirrors and make an adjustment prop-
erly.

When the mirror defoggers are operating (vehicle with outside rear
view mirror defoggers)

Do not touch the rear view mirror surfaces, as they can become very hot and
burn you.

NOTICE

If ice should jam the mirror

Do not operate the control or scrape the mirror face. Use a spray de-icer to
free the mirror.

Summary of Contents for Prius 2011












































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Prius 2011

Reviews:

Related manuals for Prius 2011

Brands by name

Popular brands

Toyota Prius 2011, Owner'S Manual

Search results

Summary of Contents for Prius 2011

Reviews:

Related manuals for Prius 2011

Brands by name

Popular brands