Toyota Prius 2011 Owner'S Manual Download Page 158

Page: 158 / 651

131

1-8. Safety information

Be
fo

re driving

PRIUS_U (OM47685U) DVD

There is a malfunction in the system

: The system judges a person of adult size as an adult. When a

smaller adult sits in the front passenger seat, the system may rec-
ognize him/her as a child depending on his/her physique and pos-
ture.

: In the event the front passenger does not wear a seat belt.

: When a large child who has outgrown a child restraint system sits

in the front passenger seat, the system may recognize him/her as
an adult depending on his/her physique or posture.

: Never install a rear-facing child restraint system on the front pas-

senger seat. A forward-facing child restraint system should only
be installed on the front passenger seat when it is unavoidable.

(

→

P. 134)

: In case the indicator is not illuminated, consult this manual as for

installing the child restraint system properly. (

→

P. 139)

Indicator/

warning light

“AIR BAG ON” and “AIR BAG OFF”

indicator lights

“AIR BAG

OFF”

SRS warning light

Front passenger’s seat belt reminder light

Off

Devices

Front passenger airbag

Deactivated

Side airbag on the front passenger seat

Activated

Curtain shield airbag in the front

passenger side

Front passenger’s seat belt pretensioner

Summary of Contents for Prius 2011












































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Prius 2011

Reviews:

Related manuals for Prius 2011

Brands by name

Popular brands

Toyota Prius 2011, Owner'S Manual

Search results

Summary of Contents for Prius 2011

Reviews:

Related manuals for Prius 2011

Brands by name

Popular brands