Toyota Prius 2011 Owner'S Manual Download Page 440

Page: 440 / 651

417

4-1. Maintenance and care

Mai

tenan

ce and care

PRIUS_U (OM47685U) DVD

Automatic car washes

Before washing the vehicle, do the following.

• Fold the mirrors back.
• Remove the antenna.

Brushes used in automatic car washes may scratch the vehicle surface
and harm your vehicle’s paint.

High pressure automatic car washes

Do not allow the nozzles of the car wash to come within close proximity
of the windows.

Before car wash, check that the fuel filler door on your vehicle is closed
properly.

Aluminum wheels

Remove any dirt immediately by using a neutral detergent. Do not use
hard brushes or abrasive cleaners. Do not use strong or harsh chemical
cleaners.

Use the same mild detergent and wax as used on the paint.

Do not use detergent on the wheels when they are hot, for example after
driving for long distance in the hot weather.

Wash detergent from the wheels immediately after use.

Bumpers and side moldings

Do not scrub with abrasive cleaners.

Summary of Contents for Prius 2011












































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Prius 2011

Reviews:

Related manuals for Prius 2011

Brands by name

Popular brands

Toyota Prius 2011, Owner'S Manual

Search results

Summary of Contents for Prius 2011

Reviews:

Related manuals for Prius 2011

Brands by name

Popular brands