Toyota Prius 2011 Owner'S Manual Download Page 564

Page: 564 / 651

542

5-2. Steps to take in an emergency

PRIUS_U (OM47685U) DVD

CAUTION

Using the tire jack

Improper use of the tire jack may lead to death or serious injuries due to
the vehicle suddenly falling off the jack.

Do not use the tire jack for any purpose other than replacing tires or
installing and removing tire chains.

Only use the tire jack that comes with this vehicle for replacing a flat
tire.

Do not use it on other vehicles, and do not use other tire jacks for
replacing tires on this vehicle.

Always check that the tire jack is securely set to the jack point.

Do not raise the vehicle while someone is in it.

When raising the vehicle, do not put an object on or under the jack.

Do not raise the vehicle to a height greater than that required to
replace the tire.

Use a jack stand if it is necessary to get under the vehicle.

Do not put any part of your body under the vehicle supported by a jack.

Do not start or operate the hybrid system while your vehicle is sup-
ported by the jack.

Take particular care when lowering the vehicle to ensure that no one
working on or near the vehicle may be injured.

Summary of Contents for Prius 2011












































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Prius 2011

Reviews:

Related manuals for Prius 2011

Brands by name

Popular brands

Toyota Prius 2011, Owner'S Manual

Search results

Summary of Contents for Prius 2011

Reviews:

Related manuals for Prius 2011

Brands by name

Popular brands