Toyota Prius 2011 Owner'S Manual Download Page 547

Page: 547 / 651

W
hen

troub

le
arises

525

5-2. Steps to take in an emergency

PRIUS_U (OM47685U) DVD

Warning message

Details

Correction

procedure

EV-Drive Mode cannot be
switched to.

A buzzer also sounds.

Use the EV-Drive
Mode when it
becomes available.

The EV-Drive Mode has been
automatically cancelled.

A buzzer also sounds.

Drive normally for a
short time.

After changing the engine oil (U.S.A. only)

Make sure to reset the oil maintenance data. (

→

P. 440)

Approach warning message

In the following instances, there is the possibility that the approach warning
will not activate even when the vehicle-to-vehicle distance decreases.

When your vehicle and the vehicle ahead are traveling at the same
speed or the vehicle ahead is traveling more quickly than your vehicle.

When the vehicle ahead is traveling at very low speed.

Immediately after cruise control speed is set.

At the instant the accelerator pedal is depressed.

Summary of Contents for Prius 2011












































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Prius 2011

Reviews:

Toyota Prius 2011, Owner'S Manual, Page: 547 / 651

Search results

Summary of Contents for Prius 2011

Reviews: