Toyota Prius 2011 Owner'S Manual Download Page 459

Page: 459 / 651

436

4-3. Do-it-yourself maintenance

PRIUS_U (OM47685U) DVD

CAUTION

When raising your vehicle

Make sure to observe the following to reduce the possibility of death or seri-
ous injury.

When using a floor jack, follow the instructions of the manual provided with
the jack.

Do not use the jack that was supplied with your vehicle.

Do not put any part of your body or get underneath the vehicle supported
only by the floor jack.

Always use floor jack and/or automotive jack stands on a solid, flat, level
surface.

Do not start the hybrid system while the vehicle is supported by the floor
jack.

Stop the vehicle on level firm ground, firmly set the parking brake and push
the “P” position switch.

Make sure to set the floor jack properly at the jack point.

Raising the vehicle with an improperly positioned floor jack will damage
the vehicle and may cause the vehicle to fall off the floor jack.

Do not raise the vehicle while someone is in the vehicle.

When raising the vehicle, do not place any objects on top of or underneath
the floor jack.

Lift up the vehicle using a floor jack
such as the one shown in the illustra-
tion.

Summary of Contents for Prius 2011












































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Prius 2011

Reviews:

Related manuals for Prius 2011

Brands by name

Popular brands

Toyota Prius 2011, Owner'S Manual

Search results

Summary of Contents for Prius 2011

Reviews:

Related manuals for Prius 2011

Brands by name

Popular brands