Toyota Prius 2011 Owner'S Manual Download Page 112

Page: 112 / 651

1-4. Adjustable components (seats, mirrors, steering wheel)

Be
fo

re driving

PRIUS_U (OM47685U) DVD

Seat belts

Make sure that all occupants are wearing their seat belts before driv-

ing the vehicle.

Correct use of the seat belts

Extend the shoulder belt so
that it comes fully over the
shoulder, but does not
come into contact with the
neck or slide off the shoul-
der.

Position the lap belt as low
as possible over the hips.

Adjust the position of the
seatback. Sit up straight
and well back in the seat.

Do not twist the seat belt.

Fastening and releasing the seat belt

Fastening the belt

Push the tab into the buckle
until a clicking sound is heard.

Releasing the belt

Press the release button.

Release

button

Summary of Contents for Prius 2011












































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Prius 2011

Reviews:

Related manuals for Prius 2011

Brands by name

Popular brands

Toyota Prius 2011, Owner'S Manual

Search results

Summary of Contents for Prius 2011

Reviews:

Related manuals for Prius 2011

Brands by name

Popular brands