Toyota Prius 2011 Owner'S Manual Download Page 264

Page: 264 / 651

238

2-4. Using other driving systems

PRIUS_U (OM47685U) DVD

The rear view monitor system can be operated when

The shift position is in “R”.

Switching the screen

Display mode

To select a display language (English, French, or Spanish).

Press and hold the

button for 6 seconds.

The monitor should turn on and the indicator should turn green.

Press the

button.

Each time the

button is pressed and released, the language

will change. The warning message should flash once after about 5
seconds, indicating that the change has been completed.

To permanently disable the monitor.

Press and hold the

button for 12 to 15 seconds.

The monitor will turn off and on after 6 seconds. Continue holding the but-
ton down until the display turns back off.

The indicator should flash orange.

The monitor will not automatically turn on again after the “POWER” switch
is turned off and on.

Green indicator comes on.

The monitor will automatically turn on
again after the “POWER” switch is
turned off and on.

Off

Orange indicator comes on.

STEP

Summary of Contents for Prius 2011












































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Prius 2011

Reviews:

Related manuals for Prius 2011

Brands by name

Popular brands

Toyota Prius 2011, Owner'S Manual

Search results

Summary of Contents for Prius 2011

Reviews:

Related manuals for Prius 2011

Brands by name

Popular brands