Toyota Prius 2011 Owner'S Manual Download Page 244

Page: 244 / 651

218

2-4. Using other driving systems

PRIUS_U (OM47685U) DVD

Adjusting the set speed

To change the set speed, operate the lever until the desired set
speed is obtained.

Increases speed

Decreases speed

Fine adjustment: Momentarily
move the lever in the desired
direction.

Large adjustment: Hold the
lever in the desired direction.

The set speed will be increased or decreased as follows:

Fine adjustment: By approximately 1 mph (1.6 km/h) each time the
lever is operated.

Large adjustment: The set speed can be increased or decreased con-
tinually until the lever is released.

Canceling and resuming the constant speed control

Pulling the lever toward you
cancels the constant speed
control.

The speed setting is also can-
celed when the brakes are
applied.

Pushing the lever up
resumes the constant
speed control.

Resuming is available when the
vehicle speed is more than
approximately 25 mph (40 km/h).

ITO24P105

ITO24P106

Summary of Contents for Prius 2011












































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Prius 2011

Reviews:

Related manuals for Prius 2011

Brands by name

Popular brands

Toyota Prius 2011, Owner'S Manual

Search results

Summary of Contents for Prius 2011

Reviews:

Related manuals for Prius 2011

Brands by name

Popular brands