Toyota Prius 2011 Owner'S Manual Download Page 432

Page: 432 / 651

408

3-6. Other interior features

PRIUS_U (OM47685U) DVD

Safety Connect

∗

: If equipped

Safety Connect is a subscription-based telematics service that uses

Global Positioning System (GPS) data and embedded cellular tech-

nology to provide safety and security features to subscribers. Safety

Connect is supported by Toyota’s designated response center,

which operates 24 hours per day, 7 days per week.

Safety Connect service is available by subscription on select,

telematics hardware-equipped vehicles.

By using the Safety Connect service, you are agreeing to be bound

by the Telematics Subscription Service Agreement and its Terms and

Conditions, as in effect and amended from time to time, a current

copy of which is available at Toyota.com. All use of the Safety Con-

nect service is subject to such then-applicable Terms and Condi-

tions.

System components

LED light indicators

“SOS” button

Microphone

Summary of Contents for Prius 2011












































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Prius 2011

Reviews:

Related manuals for Prius 2011

Brands by name

Popular brands

Toyota Prius 2011, Owner'S Manual

Search results

Summary of Contents for Prius 2011

Reviews:

Related manuals for Prius 2011

Brands by name

Popular brands