Toshiba TC32306FTG, Manual

Page: 64 / 102

TC32306FTG
2015-10-01 64
6.10.9 h’11 Charge2 Threshold Setting
Table 6-64 Register (h’11)
D7 D6 D5 D4 D3 D2 D1 D0
Name Charge2_
Th7
Charge2_
Th6
Charge2_
Th5
Charge2_
Th4
Charge2_
Th3
Charge2_
Th2
Charge2_
Th1
Charge2_
Th0
Initial 0 0 1 1 1 1 0 1
Type R/W R/W R/W R/W R/W R/W R/W R/W
[D7:D0]Charge2_Th7..0 [Quick Charge 2 Threshold Level]
When to set Data Comparator Quick Charge 2 (h'10[D6]Charge2_en = “1”) and FSK Demodulation (h'0A[D4]FSK_ASK = "0"),
this setting is valid.
In ASK Demodulation (h'0A[D4]FSK_ASK = "1"), input to this register is invalid, because the threshold level is automatically set.
- Setting Range
[D7:D0] = 0 - 255 (b’00000000 - b’11111111)
Initial Value: 61 (b’00111101)
For details, see section 6.5.9.
Notice: In ASK Demodulation (h'0A[D4]FSK_ASK = "1"), the value of that threshold level for automatically setting cannot be
read.
6.10.10 h’12 TX Deviation Setting
Table 6-65 Register (h’12)
D7 D6 D5 D4 D3 D2 D1 D0
Name Dev5 Dev4 Dev3 Dev2 Dev1 Dev0 NIR_2H1 NIR_2H0
Initial 0 0 1 1 0 0 0 0
Type R/W R/W R/W R/W R/W R/W R/W R/W
[D7:D2]Dev5..0 [Deviation]
This deviation depends on the setting of RF frequency band.
- Setting Range
[D7:D2] = 0 - 63 (b’000000 - 111111)
Initial Value: 12 (b’001100)
- Deviation Setting Range at 30.32MHz Reference Clock Frequency.
315 MHz: Unmodulated, from +/-1.67kHz to +/-105kHz
434 MHz: Unmodulated, from +/-2.5kHz to +/-157.5kHz
868 / 915 MHz: Unmodulated, from +/-5kHz to +/-315kHz
Notice: When to set this register value to "0", RF output signal is unmodulated.
Example)
Deviation: +/-dev = fd × n / nd
fd: Frequency Resolution of VCO 10kHz (= fosc / 3032) * fosc: Reference Clock Frequency (30.32MHz)
nd: Division Ratio (nd = 6 at 315MHz Band, nd = 4 at 434MHz Band nd = 2 at 868 / 915MHz Band)
n: value of register:[D7:D2]Dev5..0 (Converted to decimal)
Notice:
In ASK Receiving / Transmitting and FSK Receiving, settings of register h'12[D7:D2] are invalid.
The change of "fosc" results the change of deviation.