TC32306FTG
2015-10-01
3
5. Pin Description
5.1 Equivalent Circuit and Function
Table 5-1 Pin Description
- All the values (resistance, capacity, etc.) shown in the internal equivalent circuit diagram are typical values.
- The equivalent circuit diagrams may be simplified or some parts of them may be omitted for explanatory purpose.
Pin No.
Pin Name
I/O
Description
Internal Equivalent Circuit
1
DET_TMONI2
Digital
Output
Monitor 2
Monitoring internal signals (digital), use
for system control
At no use, open this pin.
1
Control
DET_TMONI2
COM_VDD
COM_VDD
2
DET_TMONI3
Analog
Output
Monitor 3
Monitoring internal signals (Converted to
analog / in User Test )
At no use, open this pin.
Notice:
In User Test, Supply at least 3 V to
COM_VDD pin to monitor the signal.
Lower voltage supply causes an incorrect
monitoring.
2
DET_TMONI3
COM_VDD
3
ENB
Digital
Input
Enable Pin
Select to enable (In SPI Mode)
Address Setting (In EEPROM Mode)
Set a start address to read memory data.
Notice:
Do not supply higher voltage than the
level of COM_VDD. (For example, in the
case of too low / no power supply.) That
causes overcurrent at this pin, as the
ESD protection elements insertion
between the pin and the voltage source.
3
ENB
COM_VDD
4
DET_TMONI4
Analog
Output
Monitor 4
Monitoring internal signals (Converted to
analog / in User Test)
At no use, open this pin.
Notice:
In User Test, Supply at least 3 V to
COM_VDD pin to monitor the signal.
Lower voltage supply causes an incorrect
monitoring.
DET_TMONI4
4
COM_VDD
5
3V/5V
Digital
Input
Supply Voltage Selector
Select supply voltage. Connect power
supply for 5V use. / Ground for 3V use.
Notice:
Do not supply higher voltage than the
level of COM_VDD. (For example, in the
case of too low / no power supply.) That
causes overcurrent at this pin, as the
ESD
protection
elements insertion
between the pin and the voltage source.
5
3V/5V
COM_VDD