Toshiba Satellite Pro A500 series User Manual Download

Page: 214 / 269

User’s Manual

9-14

Troubleshooting

SD/SDHC memory card, miniSD/microSD Card

For further information, please refer to Chapter 8,

Optional Devices

Problem

Procedure

SD/SDHC memory

card, miniSD/microSD

Card error occurs

Remove the SD/SDHC memory card,

miniSD/microSD Card from the computer and

then reinsert it in order to ensure it is firmly

connected.
If the problem persists, then you should refer to

the documentation supplied with your SD/SDHC

memory card, miniSD/microSD Card for further

information.

You cannot write to an

SD/SDHC memory

card

Remove the SD/SDHC memory card from the

computer and check to ensure that it is not write

protected.

You cannot read a file

Check to ensure the required file is actually on

the SD/SDHC memory card, miniSD/microSD

Card that is inserted into the computer.
If you are still unable to resolve the problem,

contact your reseller, dealer or service provider.

Summary of Contents for Satellite Pro A500 series














































































































































































































































































Search results

Summary of Contents for Satellite Pro A500 series

Reviews:

Related manuals for Satellite Pro A500 series

Brands by name

Popular brands

Toshiba Satellite Pro A500 series, User Manual

Search results

Summary of Contents for Satellite Pro A500 series

Reviews:

Related manuals for Satellite Pro A500 series

Brands by name

Popular brands