Toshiba Satellite Pro A500 series User Manual Download

Page: 62 / 269

User’s Manual

2-9

The Grand Tour

Battery safety lock

Slide this latch into its 'Unlock' position in order to

release the battery pack and prepare for removal.

Battery release latch

Slide and hold this latch into its 'Unlock' position

in order to release the battery pack.
For more detailed information on removing the

battery pack please refer to Chapter 6,

Power

and Power-up Modes

Battery pack

The battery pack provides power to the computer

when the AC adaptor is not connected. For more

detailed information on the use and operation of

the battery pack please refer to Chapter 6,

Power

and Power-up Modes

Cooling vents

The computer's cooling vents help keep the

processor from overheating.

Hard disk drive

The hard disk drive contains the main storage for

the computer. Disk size varies depending on the

model purchased.

Memory module

slots

The memory module slots are located here. The

memory module slots allow for the installation,

replacement and removal of additional memory

modules. Please refer to the

Additional memory

module

section in Chapter 8,

Optional Devices

for more information.

Summary of Contents for Satellite Pro A500 series














































































































































































































































































Search results

Summary of Contents for Satellite Pro A500 series

Reviews:

Related manuals for Satellite Pro A500 series

Brands by name

Popular brands

Toshiba Satellite Pro A500 series, User Manual

Search results

Summary of Contents for Satellite Pro A500 series

Reviews:

Related manuals for Satellite Pro A500 series

Brands by name

Popular brands