Toshiba Satellite Pro A500 series User Manual Download

Page: 109 / 269

User’s Manual

4-7

Operating Basics

3. The "

Enroll

" screen is displayed. Click the non-enrolled finger icon

above the finger and click

Next

4. The note for enrollment operation screen is displayed. Confirm the

message and click

Next

5. The Scanning Practice screen is displayed. You can practice swiping

your finger. When you have finished practicing swiping your finger, click

Next

6. The last step for enrollment screen is displayed. Swipe three times with

the same finger. If scan of fingerprint succeeds, "Enrollment succeeded!

Do you want to save this fingerprint?" will show, click "

7. In case of finger injury or authentication failure, it is recommended that

another fingerprint also be enrolled. The following message will be

displayed: "It's strongly recommended you enroll one more fingerprint".

Click

and repeat steps 3, 4, 5 and 6 with another finger.

How to Delete the Fingerprint Data

Saved fingerprint data is stored in the Non-volatile memory inside the

fingerprint sensor. If you hand over the PC to others, or dispose of it, the

following operations are recommended.
1. Click

Start

→

All Programs

→

TOSHIBA

→

Utilities

→

TOSHIBA

Fingerprint Utility

2. The TOSHIBA Fingerprint Utility main menu screen is displayed.
3. Swipe your enrolled finger to enter the main menu.
4. Delete fingerprints:

■

To delete individual fingerprints:

1. Click "Enroll".
2. Click the fingerprint mark above the registered finger.
3. "Are you sure you want to delete this template?" will be

displayed on screen, click

button. If you want to delete the

other finger, repeat step 2,3.

■

To delete for all user's fingerprints:

1. Click "Run as administrator" in lower left. If UAC setting for

windows is off, this button won't appear.

2. [User Account Control] window is displayed when you click "Run

as administrator". Select "Allow" on [User Account Control]

window.

3.  Swipe your enrolled finger.
4. Click "Fingerprint control".
5.  Click [Delete All] button in the lower right.
6.  "Are you sure you want to delete all fingerprints?" will be

displayed on screen, click OK button.

Summary of Contents for Satellite Pro A500 series














































































































































































































































































Search results

Summary of Contents for Satellite Pro A500 series

Reviews:

Related manuals for Satellite Pro A500 series

Brands by name

Popular brands

Toshiba Satellite Pro A500 series, User Manual

Search results

Summary of Contents for Satellite Pro A500 series

Reviews:

Related manuals for Satellite Pro A500 series

Brands by name

Popular brands