Toshiba Satellite Pro A500 series User Manual Download

Page: 165 / 269

User’s Manual

6-2

Power and Power-up Modes

Table 6-1 Power conditions continued

Power indicators

As shown in the below table, the

Battery, DC IN

and

Power

indicators on

the system indicator alert you to the computer’s operating capability and

battery charge status.

Battery indicator

Check the

Battery

indicator to determine the status of the battery pack -

the following indicator conditions should be noted:

Power on

Power off
(no operation)

adaptor

not

connected

Battery charge

is above low

battery trigger

point

• Operates
• LED:

Battery

off

DC IN

off

Battery charge

is below low

battery trigger

point

• Operates
• LED:

Battery

flashes Amber

DC IN

off

Battery charge

is exhausted

Computer goes into Sleep

Mode and shuts down

No battery

installed

• Cannot operate
• LED:

Battery

off

DC IN

off

Flashing amber

The battery charge is low, the AC adaptor must

be connected in order to recharge the battery.

Amber

Indicates the AC adaptor is connected and the

battery is charging.

White

Indicates the AC adaptor is connected and the

battery is fully charged.

No light

Under any other conditions, the indicator does

not light.

If the battery pack becomes too hot while it is being charged, the charge

will stop and the

Battery

indicator will go out. When the battery pack's

temperature falls to a normal range, charging will resume - this process will

occur regardless of whether the computer's power is on or off.

Summary of Contents for Satellite Pro A500 series














































































































































































































































































Search results

Summary of Contents for Satellite Pro A500 series

Reviews:

Related manuals for Satellite Pro A500 series

Brands by name

Popular brands

Toshiba Satellite Pro A500 series, User Manual

Search results

Summary of Contents for Satellite Pro A500 series

Reviews:

Related manuals for Satellite Pro A500 series

Brands by name

Popular brands