Toshiba Satellite Pro A500 series User Manual Download Page 88

Page: 88 / 269

User’s Manual

3-1

Chapter 3

Getting Started

This chapter provides basic information to start using your computer. It

covers the following topics:

■

Connecting the AC adaptor

■

Opening the display

■

Turning on the power

■

Starting up for the first time

■

Turning off the power

■

Restarting the computer

■

System Recovery Options

■

Creating Optical Recovery Discs

■

Restoring the pre-installed software from the Recovery hard disk drive

■

Restoring the pre-installed software from your created Recovery Discs

■

If the battery pack is not pre-installed in the computer that you

purchased, please install the battery pack before you start using the

computer.

Please refer to Chapter 6-9,

Replacing the battery pack

for further

information about installing the battery pack.

■

All users should be sure to read the section

Starting up for the first

time

■

Be sure to read the enclosed Instruction Manual for Safety and

Comfort for information on the safe and proper use of this computer. It

is intended to help you be more comfortable and productive while

using a notebook computer. By following the recommendations in it

you may reduce your chance of developing a painful or disabling

injury to your hand, arms, shoulders or neck.

Summary of Contents for Satellite Pro A500 series














































































































































































































































































Search results

Summary of Contents for Satellite Pro A500 series

Reviews:

Related manuals for Satellite Pro A500 series

Brands by name

Popular brands

Toshiba Satellite Pro A500 series, User Manual

Search results

Summary of Contents for Satellite Pro A500 series

Reviews:

Related manuals for Satellite Pro A500 series

Brands by name

Popular brands