Toshiba Satellite Pro A500 series User Manual Download

Page: 157 / 269

User’s Manual

4-55

Operating Basics

Using the Hard Disk Drive (HDD) Protection

This computer has a function for reducing the risk of damage on the hard

disk drive.
Using an acceleration sensor built into the computer, TOSHIBA HDD

Protection detects vibration shocks and similar signs of movement of the

computer, and automatically moves the Hard Disk Drive head to a safe

position to reduce the risk of damage that could be caused by head-to-disk

contact.

When vibration is detected, a message will be displayed on the screen, and

the icon in the Taskbar notification area will changed to the protection state.

This message is displayed until the

button is pressed or 30 seconds

pass. When vibration subsides, the icon returns to the normal state.

Taskbar icon

TOSHIBA HDD Protection Properties

You can change the TOSHIBA HDD Protection settings by using the

TOSHIBA HDD Protection window. To open the window, click

Start

All

Programs

TOSHIBA

HDD Protection Settings

. The window can

also be started from the icon on the Taskbar or from the

Control Panel

HDD Protection

You can choose whether to enable or disable TOSHIBA HDD Protection.

Detection Level

This function can be set to four levels. The sensitivity levels in which

vibrations, impacts and their similar signs are detected can be set to OFF,

1, 2 and 3 in ascending order. Level 3 is recommended for better protection

of the computer. However, when the computer is used in a mobile

environment or in other unstable conditions, setting the detection level to 3

could result in frequent execution of TOSHIBA HDD Protection, which will

slow Hard Disk Drive reading and writing. Set a lower detection level when

the speed of Hard Disk Drive reading and writing is a priority.

The TOSHIBA HDD Protection function does not guarantee that the hard

disk drive will not be damaged.

State

Icon

Description

Normal

TOSHIBA HDD Protection is enabled.

Protection

TOSHIBA HDD Protection is active. The hard disk

drive head is in a safe position.

OFF

TOSHIBA HDD Protection is disabled.

Summary of Contents for Satellite Pro A500 series














































































































































































































































































Search results

Summary of Contents for Satellite Pro A500 series

Reviews:

Related manuals for Satellite Pro A500 series

Brands by name

Popular brands

Toshiba Satellite Pro A500 series, User Manual

Search results

Summary of Contents for Satellite Pro A500 series

Reviews:

Related manuals for Satellite Pro A500 series

Brands by name

Popular brands