Toshiba Satellite Pro A500 series User Manual Download

Page: 206 / 269

User’s Manual

9-6

Troubleshooting

Battery

If you suspect a problem with the battery, you should check the status of

the

DC IN

indicator as well as the

Battery

indicator. Please refer to Chapter

Power and Power-up Modes

for more information on these indicators,

together with general battery operation.

Problem

Procedure

Battery doesn’t power

the computer

The battery may be discharged - connect the AC

adaptor to recharge the battery.

Battery doesn’t charge

when the AC adaptor

is attached (

Battery

indicator does not

glow amber).

If the battery is completely discharged, it will not

begin charging immediately, in these instances

you should wait a few minutes before trying

again. If the battery still does not charge, you

should check that the power outlet to which the

AC adaptor is connected is supplying power - this

can be tested by plugging another appliance into

it.

Check whether the battery is hot or cold to the

touch - if so, it will not charge properly and should

be allowed to reach room temperature before

you try again.

Unplug the AC adaptor and remove the battery to

make sure its connecting terminals are clean - if

necessary wipe them with a soft dry cloth lightly

dipped in alcohol.
Connect the AC adaptor and replace the battery,

taking care to ensure that it is securely seated in

the computer.
Check the

Battery

indicator - if it does not glow,

allow the computer to charge the battery for at

least twenty minutes. If the

Battery

indicator

starts to glow after this period, allow the battery

to continue to charge for at least another twenty

minutes before turning on the computer.

However, if the indicator still does not glow, the

battery may be at the end of its operating life and

should be replaced. However, if you do not

believe the battery is at the end of its operating

life, you should speak to your reseller, dealer or

service provider.

Battery doesn’t power

the computer as long

as expected

If you frequently recharge a partially charged

battery, the battery might not charge to its full

potential - in these instances you should fully

discharge the battery and then attempt to charge

it again.

Check the

Power saver

option under

Select a

power plan

in the

Power Options

Summary of Contents for Satellite Pro A500 series














































































































































































































































































Search results

Summary of Contents for Satellite Pro A500 series

Reviews:

Related manuals for Satellite Pro A500 series

Brands by name

Popular brands

Toshiba Satellite Pro A500 series, User Manual

Search results

Summary of Contents for Satellite Pro A500 series

Reviews:

Related manuals for Satellite Pro A500 series

Brands by name

Popular brands