Toshiba Satellite Pro A500 series User Manual Download

Page: 193 / 269

User’s Manual

8-12

Optional Devices

Disconnecting the USB floppy diskette drive

When you have finished using the USB floppy diskette drive, you can follow

the procedures below in order to disconnect it:
1. Wait for the Disk-In-Use Indicator light to go out to make sure all floppy

diskette activity has stopped.

2. Click the

Safely Remove Hardware

icon on the Task Bar.

3. Click the USB floppy diskette drive device that you want to remove.
4. Carefully pull the floppy diskette drive's USB connector out from within

the computer's USB port.

eSATA (External Serial ATA)

An device corresponding to eSATA function can be connected to the USB

(eSATA combo) port on the computer.

Connecting the eSATA device

To connect an eSATA device, follow the steps as detailed below:
1. Connect an eSATA cable to the eSATA/USB combo port.

Figure 8-8 Connecting an eSATA cable to the USB (eSATA combo) port

If you disconnect the floppy diskette drive or turn off the power while the

computer is accessing the drive you may lose data or damage the floppy

diskette or the drive.

Make sure the connector is properly aligned with the socket.Do not try to

force the connection, doing so can damage the connecting pins.

Summary of Contents for Satellite Pro A500 series














































































































































































































































































Search results

Summary of Contents for Satellite Pro A500 series

Reviews:

Related manuals for Satellite Pro A500 series

Brands by name

Popular brands

Toshiba Satellite Pro A500 series, User Manual

Search results

Summary of Contents for Satellite Pro A500 series

Reviews:

Related manuals for Satellite Pro A500 series

Brands by name

Popular brands