Toshiba Satellite Pro A500 series User Manual Download

Page: 15 / 269

User’s Manual

LUOKAN 1 LASERLAITE
APPAREIL A LASER DE CLASSE1
KLASS 1 LASER APPARAT

Before it is shipped, the Class 1 Laser is certified to meet the United States

Chapter 21 Standards of the Department of Health and Human Services

(DHHS 21 CFR).
For any other country, the drive is certified to meet the Class 1 Laser

standards of IEC825 and EN60825.

Optical disc drive safety instructions

DVD Super Multi (+-R DL) drive

Panasonic UJ890AD/UJ890ED

■

The drive employs a laser system. To ensure proper use of this

product, please read this instruction manual carefully and retain for

future reference.

Should the unit ever require maintenance, contact an authorized

service location.

■

Use of controls, adjustments or the performance of procedures other

than those specified may result in hazardous radiation exposure

■

To prevent direct exposure to the laser beam, do not try to open the

enclosure.

Location of the required label

COMPLIES WITH FDA RADIATION
PERFORMANCE STANDARDS, 21
CFR SUBCHAPTER J.

MANUFACTURED

Panasonic Communications Co., Ltd.
1-62, 4-Chome Minoshima
Hakata-ku Fukuoka, Japan

Summary of Contents for Satellite Pro A500 series














































































































































































































































































Search results

Summary of Contents for Satellite Pro A500 series

Reviews:

Related manuals for Satellite Pro A500 series

Brands by name

Popular brands

Toshiba Satellite Pro A500 series, User Manual

Search results

Summary of Contents for Satellite Pro A500 series

Reviews:

Related manuals for Satellite Pro A500 series

Brands by name

Popular brands