User’s Manual
4-5
Operating Basics
■
Wash and dry your hands thoroughly.
■
Remove static electricity from your fingers by touching any metal
surface. Static electricity is a common cause of sensor failures,
especially when the weather is dry.
■
Clean the sensor with a lint-free cloth - do not use detergent or any
other chemicals to clean the sensor.
■
Avoid the following finger conditions for enrollment or recognition as
they may result in fingerprint enrollment errors or a drop in the
fingerprint recognition success rate
■
Soaked or swollen finger, for example as may occur after taking a
bath.
■
Injured finger
■
Wet finger
■
Soiled or oily finger
■
Extremely dry skin condition on finger
Observe the following to improve the fingerprint recognition success rate.
■
Enroll two or more fingers.
■
Enroll additional fingers if a recognition failure often occurs when using
already enrolled fingers.
■
Check the condition of your finger - any conditions which have changed
since enrollment, such as injury, rough skin, and extremely dry, wet,
soiled, dirty, oily, soaked or swollen fingers, may lower the recognition
success rate. Also if the fingerprint is worn down or the finger becomes
thinner or fatter, the recognition success rate may be lowered.
■
The fingerprint for each finger is different and unique. Please ensure
that only the registered or enrolled fingerprint or fingerprints are used
for identification.
■
Check sliding position and speed.
■
The fingerprint sensor compares and analyzes the unique
characteristics in a fingerprint. However, there may be instances where
certain users are unable to register their fingerprints due to insufficient
unique characteristics in their fingerprints.
■
The recognition success rate may differ from user to user.
