Toshiba Satellite Pro A500 series User Manual Download

Page: 150 / 269

User’s Manual

4-48

Operating Basics

Wireless LAN

The Wireless LAN is compatible with other LAN systems based on Direct

Sequence Spread Spectrum/Orthogonal Frequency Division Multiplexing

radio technology that complies with the IEEE802.11 Wireless LAN

standard.

■

Frequency Channel Selection of 5GHz for IEEE 802.11a or n 2.0

■

Frequency Channel Selection of 2.4GHz for 802.11b/g or n 2.0

■

Roaming over multiple channels

■

Card power management

■

Wired Equivalent Privacy (WEP) data encryption based on an 128-bit

encryption algorithm

■

Wi-Fi Protected Access™ (WPA™) support

■

Advanced Encryption Standard (AES) data encryption

Setting

1. Please make sure that the Wireless Communication Switch is turned

on.

2. Click

Start

and then click

Control Panel

3. Click

Connect to the Internet

4. Click

Wireless

5. When

Wireless Network Connection

window appears on the lower

right screen, click one of access points.

6. Check

Connect automatically

box then click

Connect

button.

7. You will need to set security settings. Consult the documentation

accompanied with your router or ask your wireless network

administrator for the settings.

Security

■

TOSHIBA strongly recommend that you enable encryption functionality,

otherwise your computer will be open to illegal access by an outsider

using a wireless connection. If this occurs, the outsider may illegally

access your system, eavesdrop, or cause the loss or destruction of

stored data.

■

TOSHIBA is not liable for the loss of data due to eavesdropping or

illegal access through the wireless LAN and the damage thereof.

The transmission speed over the wireless LAN, and the distance over

which the wireless LAN can reach, may vary depending on surrounding

electromagnetic environment, obstacles, access point design and

configuration, client design and software/hardware configurations. The

transmission rate described is the theoretical maximum speed as specified

under the appropriate standard - the actual transmission speed will be

lower than the theoretical maximum speed.

Summary of Contents for Satellite Pro A500 series














































































































































































































































































Search results

Summary of Contents for Satellite Pro A500 series

Reviews:

Related manuals for Satellite Pro A500 series

Brands by name

Popular brands

Toshiba Satellite Pro A500 series, User Manual

Search results

Summary of Contents for Satellite Pro A500 series

Reviews:

Related manuals for Satellite Pro A500 series

Brands by name

Popular brands