background image

Great user manuals database on 

UserManuals.info

Dell™ Inspiron™ 1011 Service Manual 

 

 

Notes, Cautions, and Warnings 

Information in this document is subject to change without notice. 

© 2009 Dell Inc. All rights reserved.

 

Reproduction of these materials in any manner whatsoever without the written permission of Dell Inc. is strictly forbidden. 

Trademarks used in this text: 

Dell

, the 

DELL

 logo, and

 Inspiron 

are trademarks of Dell Inc.; 

Bluetooth

 is a registered trademark owned by Bluetooth SIG, Inc. and is used by Dell 

under license; 

Microsoft

 and 

Windows

 are either trademarks or registered trademarks of Microsoft Corporation in the United States and/or other countries. 

Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Dell Inc. disclaims any 
proprietary interest in trademarks and trade names other than its own. 

Model PP19S 

April 2009 Rev. A00 

Before You Begin

 

Battery 

 

Keyboard 

 

Hard Drive

 

Palm Rest 

 

Palm Rest Bracket 

 

Communication Cards 

 

Power/Battery Status Light Board 

 

Speakers 

 

Internal Card With Bluetooth

® 

Wireless Technology

  

Power Button Board 

 

USB and SIM Card Board 

 

AC Adapter Connector 

 

System Board 

 

Memory 

 

Coin-Cell Battery 

 

Display 

 

Camera 

 

Flashing the BIOS

 

NOTE: 

A NOTE indicates important information that helps you make better use of your computer. 

 

CAUTION: 

A CAUTION indicates either potential damage to hardware or loss of data and tells you how to avoid the problem. 

 

WARNING: 

A WARNING indicates a potential for property damage, personal injury, or death. 

Summary of Contents for Inspiron 1011











































Reviews: