Parts Number: 27L3404
ThinkPad 770X
Quick Reference and Service Information
Your Name:
Company Name:
Model Number:
Serial Number:
Company or Reseller Service:
IBM Service Web Site:
IBM Service Number:
Locations
Indicator panel
TrackPoint
Click buttons
Latch
Latch with
UltraBay
indicator
Bay eject levers
UltraBay II
PC Card slots
Telephone
jack
External diskette
drive
connector
Parallel
connector
Rear infrared port
Serial connector
Power jack
Power switch
Headphone jack
Battery pack
Microphone/
line-in jack
System-expansion
connector
Universal serial bus
connector
Attaching Options
Function Keys
You want to...
You need to...
Swap the device in
the UltraBay II
Release the bay eject levers; then a
message appears. Make sure the
LED stays green and there is no
beep; then swap the device.
Attach the diskette
drive externally
Power off your computer; then
attach the external diskette drive.
Note:
Some devices or configurations might not support hot
plugging or unplugging.
If the LED is blinking orange, do not attempt to swap the
device.
Fn
+
Result
F2
Displays the battery power status indicator or
erases it if it is displayed. (The Fuel-Gauge
program must first be activated.)
F3
Places the computer in standby mode.
F4
Places the computer in suspend mode.
F7
Changes computer display output locations.
Notes:
F8
Displays computer output in XGA (full-screen)
mode. If the computer is equipped with a
13.7-inch SXGA display and used in standard
VGA mode, you cannot use this function.
F11
Changes the power mode.
F12
Places the computer in hibernation mode.
Copyright IBM Corp.1998
