manualshive.com logo in svg

Toshiba QOSMIO F30 Series, Maintenance Manual, Page: 76 / 432

Share
Download
Toshiba QOSMIO F30 Series Maintenance Manual Download Page 76

2  Troubleshooting Procedures  

2.4  System Board Troubleshooting 

2-32 

[CONFIDENTIAL] 

QOSMIO F30  Maintenance Manual (960-555) 

Procedure 3 

Diagnostic Test Program Execution Check 

Execute the following tests from the Diagnostic Test Menu. These tests check the system 
board. Refer to Chapter 3, 

Tests and Diagnostic,

 for more information on how to perform 

these tests. 

1.

 

System test 

2.

 

Memory test 

3.

 

Keyboard test 

4.

 

Display test 

5.

 

Floppy Disk test 

6.

 

Printer test 

 

[It is not supported] 

7.

 

Async test 

 

[It is not supported] 

8.

 

Hard Disk test  

9.

 

Real Timer test 

10.

 

NDP test 

11.

 

Expansion test 

12.

 

CD-ROM/DVD-ROM test 

13.

 

Only One test 

14.

 

Wireless LAN test 

15.

 

Sound/LAN/Modem test 

16.

 

Bluetooth test 

17.

 

IEEE 1394 test 

If an error is detected during these tests, go to Procedure 4. 

Procedure 4 

Replacement Check 

System board may be faulty. Disassemble the computer following the steps described in 
Chapter 4, 

Replacement Procedures

 and replace system board with a new one. 

Summary of Contents for QOSMIO F30 Series

















































































































































































































































































































































































































































Reviews:

No comments