manualshive.com logo in svg

Toshiba QOSMIO F30 Series, Maintenance Manual, Page: 339 / 432

Share
Download
Toshiba QOSMIO F30 Series Maintenance Manual Download Page 339

Appendix A  Handling the LCD Module 

Appendices 

Appendix A 

 

Appendix A  Handling the LCD Module 

Precautions for handling the LCD module 

The LCD module can be easily damaged during assembly or disassembly. Observe the 
following precautions when handling the LCD module: 

 

1.

 

When installing the LCD module in the LCD cover, be sure to seat it so that it is 
properly aligned and maximum visibility of the display is maintained. 

 

2.

 

Be careful to align the holes at the four corners of the LCD module with the 
corresponding holes in the LCD cover before securing the module with screws.  
Do not force the module into place, because stress can affect its performance. 

Also, the panel’s polarized surface is easily scarred, so be careful when handling it. 

 

QOSMIO F30  Maintenance Manual (960-555) 

  [CONFIDENTIAL] 

A-1 

Summary of Contents for QOSMIO F30 Series

















































































































































































































































































































































































































































Reviews:

No comments