manualshive.com logo in svg

Toshiba QOSMIO F30 Series, Maintenance Manual, Page: 418 / 432

Share
Download
Toshiba QOSMIO F30 Series Maintenance Manual Download Page 418

Appendices  

Appendix J   Maintenance of TOSHIBA RAI

 

J-14 [CONFIDENTIAL]

 

QOSMIO F30  Maintenance Manual (960-555) 

Create Array 

This section explains how to select option and build array. The  [Create Array] option 
can be selected only when there is a drive not assigned. To build array, follow the 
procedure below. 

1.  Put the cursor on [Create Array] in [Main Menu] and press 

[Enter]

 

key. 

2. Select RAID level. Put the cursor on [RAID-1] or [RAID-0] and press 

[Enter]

 

key. 

3.  Put the cursor on the drive to be incorporated in [Physical Drive] and press 

[Space]

 

key to select a drive. When a drive selected, the status of [Physical 

Drive] changes to “ON LINE”. When selecting plural, repeat the same operation.  

4.  After selecting a drive, press 

[Enter]

 

key. 

5.  The [RAID Parameter] is displayed. The setting of parameter in the following 

table can be made. 
Put the cursor on the item to be set and press 

[

Enter] 

key. Put the cursor on the 

value to be set and press 

[Enter]

 

key. 

Table J-5  Item of parameter set 

Option  

Explanation 

DONE 

When this option is selected after completing of setting in [Create 
Array] menu, building of RAID is decided. 

Stripe Size 

Designates the size of segment written in each disk of RAID-0 
(Striping). The Stripe Size is only 64KB. This parameter can be set 
only in the RAID-0 configured by two drives. 

Write Cache 

Displays the setting of Write Cache of drive. This can select “Enable 
(use)” or “Disable (not use)”. The default is “Enable (use)”. 

Degrade Bootup 
 

Displays if boot up OS or not When the array is degraded. “Yes 
(boot up)” or “No (not boot up)” is selected. The default is “Yes (boot 
up)”. This option can be selected in RAID-1 (Mirroring). 

MBR Protection 
 

Displays the setting of protection function of MBR (Master Boot 
Record). “Enable (protect)” or “Disable (not protect)” is selected. 
The default is “Disable (not protect)”. 

S.M.A.R.T. 
 

Displays the setting of failure prediction function of drive. “Enable” 
or “Disable” is displayed.  The default is “Enable”. 

Initialize 
 

Initialize the MBR of array. Normally, it is done when the array is 
made newly. For details, refer to “ Initializing array”. Initializing sets 
the rebuild limit to 10GB.  

After completing the detailed setting, array is initialized. Put the cursor on 
“Initialize” and press 

[Enter] 

key. Put the cursor on the “Yes” and press 

[Enter] 

key. If the array is initialized, date of array is lost. Selecting  “No” dose not 
initialize. 

Summary of Contents for QOSMIO F30 Series

















































































































































































































































































































































































































































Reviews:

No comments