manualshive.com logo in svg

Toshiba QOSMIO F30 Series, Maintenance Manual, Page: 35 / 432

Share
Download
Toshiba QOSMIO F30 Series Maintenance Manual Download Page 35

1.8  Batteries 

1  Hardware Overview 

QOSMIO F30  Maintenance Manual (960-555) 

 [CONFIDENTIAL] 

1-21 

1.8.2  Battery Charging Control 

Battery charging is controlled by a power supply microprocessor. The power supply 
microprocessor controls power supply and detects a full charge when the AC adaptor and 
battery are connected to the computer. 

‰

 

Battery Charge 

When the AC adapter is connected, normal charging is used while the system is 
turned on and quick charge is used while the system is turned off. Refer to the 
following Table 1-9. 

Table 1-9 Time required for charges of main battery 

Battery type 

Quick charge 

Normal charge 

Battery 6cell (4,700mAh) 

About 3.0 to 3.5 or longer (hours)

Battery 9cell (7,050mAh) 

About 3.0 (hours) 

About 3.0 to 5.0 or longer (hours)

 

Charge is stopped in the following cases. 

1. The main battery is fully charged 

2. The main battery is removed 

3. Main battery or AC adapter voltage is abnormal 

4. Charging current is abnormal 

‰

 

Data preservation time  

When turning off the power in being charged fully, the preservation time is as 
following Table 1-10. 

Table 1-10 Data preservation time 

Condition preservation 

time 

Standby 

About 5 days (Battery 6cell (4,700mAh)) 
About 8 days (Battery 9cell (7,050mAh)) 

Boot mode 

About 20 days (Battery 6cell (4,700mAh)) 
About 35 days (Battery 9cell (7,050mAh)) 

 

Summary of Contents for QOSMIO F30 Series

















































































































































































































































































































































































































































Reviews:

No comments