manualshive.com logo in svg

Toshiba QOSMIO F30 Series, Maintenance Manual, Page: 218 / 432

Share
Download
Toshiba QOSMIO F30 Series Maintenance Manual Download Page 218

3 Tests and Diagnostics 

3.32 SETUP 

3-98 

 [CONFIDENTIAL] 

QOSMIO F30 Maintenance Manual (960-555) 

Battery optimized 

 

 

If the CPU becomes too hot, the processing 
speed is lowered. If the temperature is still too 
high, the fan turns on. When the CPU 
temperature falls to a normal range, the fan is 
turned off and the processing speed is increased. 

NOTE:  Too hot condition may cause defect on the CPU. When the hot condition 

continues, the power is automatically turned off in resume mode. 

(b)

 

PCI Express Link ASPM 

This option set the power-saving function of PCI Express on the following 
conditions. 

Auto   

 

 

 

 

PCI Express devices are not used while battery 
operation. (Default) 

Disabled   

 

 

 

 

Disable the Power-saving function and drive 
with maximum performance. 

Enabled   

 

 

 

 

PCI Express devices are not used. 

(c)

 

Enhanced C-States 

This option set the power-saving function of Enhanced C-States on the 
following conditions.

 

Enabled   

 

 

 

 

This lowers the power consumption. (Default) 

Disabled   

 

 

 

 

This does not lower the power consumption.  

4.

 

Password 

This option sets or resets the user password for power on and instant security 
(

Fn+F1

). 

Registered

 

 

 

The user password has been registered. 

Not registered

 

 

The user password has not been registered. 

For details on setting the user password, refer to the User’s Manual. 

Summary of Contents for QOSMIO F30 Series

















































































































































































































































































































































































































































Reviews:

No comments