manualshive.com logo in svg

Toshiba QOSMIO F30 Series, Maintenance Manual, Page: 258 / 432

Share
Download
Toshiba QOSMIO F30 Series Maintenance Manual Download Page 258

4 Replacement Procedures  

4.7 MDC 

 

4-22 

[CONFIDENTIAL] 

QOSMIO F30  Maintenance Manual (960-555) 

Installing the MDC 

The following describes the procedure for installing the MDC (See Figure 4-11). 

1.

 

Connect the 

modem cable

 to the connector on the MDC. 

2.

 

Install the 

MDC

 and connect it to the connector 

CN3010

 on the system board. 

CAUTION:   Be sure to install the MDC straight down carefully fitting the connectors of 

the MDC and system board, or the connectors may be damaged. 

3.

 

Secure the MDC with the following 

screws

. 

•

 

M2.0

×

4B 

 BIND 

screw 

   

×

2 

Summary of Contents for QOSMIO F30 Series

















































































































































































































































































































































































































































Reviews:

No comments