Toshiba QOSMIO F30 Series, Maintenance Manual, Page: 68 / 432

2 Troubleshooting Procedures 2.4 System Board Troubleshooting
2-24 [CONFIDENTIAL] QOSMIO F30 Maintenance Manual (960-555)
Table 2-4 Debug port (Boot mode) error status (3/10)
D port status Inspection items Details
Prohibition of cache
Permission of L1/L2 cache in
Flash ROM area
Update of microcode
Initialization of H/W (before
DRAM recognition) Initialization of MCH
Initialization of ICH.D30.Func0
Initialization of ICH.D31.Func0
Initialization of ICH.D31.Func1/2
Initialization of USB Controller
Initialization of ICH.D31.Func3
Initialization of ICH Audio
F100h
Initialization of TI Controller
Initialization of PIT channel 1
(Setting the refresh interval to “30
μ
s”)
Check of DRAM type and size
(at cold boot) When unsupported memory is connected, becoming
HLT after beep sound (HLT when DRAM size is 0) F101h
SM-RAM stack area test HLT When it can not be used as a stack
Cache configuration
Cache permission (L1/L2 Cache)
CMOS access test (at cold boot) (HLT when an error is detected)
Battery level check of CMOS
CMOS checksum check
Initialization of CMOS data (1)
Setting of IRT status (Setting of boot status and IRT busy flag, The rest bits
are 0)
F102h
Storing DRAM size in CMOS
Not resume when a CMOS error occurred
Not resume when resume status code is not set
Resume error check
S3 returning error (1CH) (Resume error =F17AH)
SM-RAM checksum check (Resume error =F173H)
Check of memory configuration change (Resume
error =F173H)
F103h Resume branch (at cold boot)
RAM area checksum check in system BIOS (Resume
error =F179H)