manualshive.com logo in svg

Toshiba QOSMIO F30 Series, Maintenance Manual, Page: 245 / 432

Share
Download
Toshiba QOSMIO F30 Series Maintenance Manual Download Page 245

4.2 Battery pack 

4 Replacement Procedures  

 

6.

 

Separate the 

battery cover 

and 

battery 

while

 

releasing the 

hooks

 of the battery 

cover. 

 

Battery

Battery cover 

Hook 

Figure 4-2  Removing the battery 

NOTE:  Dispose of the used battery pack in accordance with the laws and ordinances of 

your local authority. 

Installing the battery pack 

The following describes the procedure for installing the battery pack (See Figure 4-1 and 4-2). 

CAUTION:  There is a danger that the lithium ion battery pack may explode if not fitted, 

operated, handled, or disposed correctly. Dispose always the used battery 
pack in accordance with the laws and ordinances of your local authority. 
Use only the batteries approved by Toshiba. 

NOTE:  Check visually the battery terminals and clean off any dirt with a dry cloth. 

1.

 

Turn off the power of the computer. 

2.

 

Disconnect the AC adapter and all external devices from the computer. 

3.

 

Attach the 

battery cover

 to the 

battery pack

. 

4.

 

Place the 

battery pack

 

assembly

 into the slot and insert it carefully. 

5.

 

Slide the 

battery lock

 to the lock position. Make sure that the battery pack is securely 

in place and the battery lock is in the lock position. 

QOSMIO F30  Maintenance Manual (960-555) 

[CONFIDENTIAL] 

4-9 

Summary of Contents for QOSMIO F30 Series

















































































































































































































































































































































































































































Reviews:

No comments