manualshive.com logo in svg

Toshiba QOSMIO F30 Series, Maintenance Manual, Page: 172 / 432

Share
Download
Toshiba QOSMIO F30 Series Maintenance Manual Download Page 172

3  Tests and Diagnostics  

3.21 ONLY ONE TEST 

 

 

Subtest 06 

Button 

 

This subtest checks if the Operation buttons (11 buttons) work properly. 

 

The following message appears in the display. 

 

 

 

 

0 1 2 3 4 5 6 7 8 9 A 
                      
* * * * * * * * * * * 

Press Function button ! 

Press

 the first Operation button from the left (The first * from the left is lighted 

in green.). The name of Operation button in the message is described as 
number (0-A) from the left side. (Refer to the following picture.) 

 

 

 

Operation buttons

8

7

6

2

5

4

3

 1 

0 

9

 A 

 

Press the indicated Operation button, following message will appear in the 
display. 

 

 

 

Press Function button ! OK 

 

As the same way, press the indicated touch sensor button and carry on the 
touch sensor button test. 

 

If wrong key is pressed, following message will appear in the display. 

 

 

Press Function button ! NG 

 

 

Press any key ! 

 

Pressing any key, indication of pressing touch sensor button will appear in the 
display again. Unless the right touch sensor button is pressed, this operation is 
repeated. 

 

After checking all touch sensor button, return to the ONLY ONE TEST menu 
automatically. 

3-52 

[CONFIDENTIAL] 

QOSMIO F30 Maintenance Manual (960-555) 

Summary of Contents for QOSMIO F30 Series

















































































































































































































































































































































































































































Reviews:

No comments