manualshive.com logo in svg

Toshiba QOSMIO F30 Series, Maintenance Manual, Page: 181 / 432

Share
Download
Toshiba QOSMIO F30 Series Maintenance Manual Download Page 181

3.25  Floppy Disk Drive Utilities 

3  Tests and Diagnostics  

 

QOSMIO F30 Maintenance Manual (960-555) 

[CONFIDENTIAL] 

3-61 

4.

 

DUMP program 

(a)

 

When DUMP is selected, the following message appears: 

DIAGNOSTICS-HARD DISK & FLOPPY DISK DUMP : VX.XX 
Drive type select (1:FDD, 2:HDD) ? 

(b)

 

Select a drive type. If 

2:HDD

 is selected, the display will go to step (h). If 

1:FDD

 is selected, the following message will appear: 

Select drive number   (1:A, 2:B) ? 

(c)

 

Select a drive number and the following message will be displayed. 

Format type select (1:2DD, 3:2HD) ? 

(d)

 

If 

3:2HD

 is selected, the following message will appear. Select a media mode. 

2HD media mode (1:1.20MB, 2:1.44MB, 3:1.23MB)? 

(e)

 

The following message will appear: 

Insert source disk into drive A: 
Press any key when ready. 

(f)

 

Insert a source disk and press any key and the following message will appear: 

——

 Max. address —— 

[Track ] = XXXX 
[Head  ] = XX 
[Sector] = XX 

Track number ???? 

(g)

 

Set the track number, head number and sector number you want to dump. The 
system will access the disk and dump a list. Then the message shown in (k) 
will appear. 

(h)

 

The following message will appear when selecting 

2:HDD

 in (a). 

Select drive number   (1:C, 2:D) ? 

(i)

 

Select a drive number and the following message will be displayed. 

---Max. address --- 
[LBA ] = XXXXXXXXX 

LBA number ???????? 

(j)

 

Set the LBA number you want to dump. The system will access the disk and 
dump a list.  

Summary of Contents for QOSMIO F30 Series

















































































































































































































































































































































































































































Reviews:

No comments