manualshive.com logo in svg

Toshiba QOSMIO F30 Series, Maintenance Manual, Page: 411 / 432

Share
Download
Toshiba QOSMIO F30 Series Maintenance Manual Download Page 411

Appendix J   Maintenance of TOSHIBA RAID 

Appendices

 

QOSMIO F30  Maintenance Manual (960-555) 

[CONFIDENTIAL] 

J-7 

(2) Check if it is caused by an operation miss or is a failure. 

To check if the cause of failure of Port1 is an operation miss or not, analyze the Drive 
Log of Port0. 

1.  In [REDUNDANT] of Port-0, find a log of “Fail this drive” message by 

[PgUp] 

and

 [PgDn] 

key. 

2.  If no message of “Fail this drive” message, it is judged that the second HDD is 

removed without the operation of removal by TOSHIBA RAID console and 
installed again.  

(3) How to change the status to OFF LINE 

Release the status of “Fail”, using the menu of [Force OFFLINE]. This HDD is not 
necessary to be repaired.  

 

Summary of Contents for QOSMIO F30 Series

















































































































































































































































































































































































































































Reviews:

No comments