manualshive.com logo in svg

Toshiba QOSMIO F30 Series, Maintenance Manual, Page: 415 / 432

Share
Download
Toshiba QOSMIO F30 Series Maintenance Manual Download Page 415

Appendix J   Maintenance of TOSHIBA RAID 

Appendices

 

QOSMIO F30  Maintenance Manual (960-555) 

[CONFIDENTIAL] 

J-11 

Physical Drive 

In Physical Drive, the condition of RAID array is displayed by array. The following 
items are displayed. 

Table J-3  Items displayed in Physical Drive 

 Explanation 

Port 

Displays the port number of Serial ATA connected to the drive. 

Assign 

Displays the array number and drive number of array that the drive 
is incorporated. The display format is LD [Array number]  
[Drive number]. For example, [LD0-1] means the disk drive 1 of 
Array 0. 

Status 

Displays the drive status. The followings are displayed.  
-ONLINE: The drive is working normally. 
-OFFLINE: The drive is not configured as array and is not used. 
-FAIL: The drive is failed and dose not work. 
-REBUILDING: The drive is been rebuilding by data of normal drive 

or the rebuilding is suspended. 

-UNKNOWN: There is controversy in the RAID information of other 

drive and the status is not decided. It is displayed when this drive 
was removed and used in the past. When this drive has been 
found good one, setting to OFFLINE is possible by executing 
[Force Offline].  

Size 

Displays the capacity of drive. 

Model 

Displays the model number of drive. 

Rev 

Displays the firmware revision of drive. 

Progress 

Displays the progress of rebuilding and Check media. 

 

Summary of Contents for QOSMIO F30 Series

















































































































































































































































































































































































































































Reviews:

No comments