manualshive.com logo in svg

Toshiba QOSMIO F30 Series, Maintenance Manual, Page: 416 / 432

Share
Download
Toshiba QOSMIO F30 Series Maintenance Manual Download Page 416

Appendices  

Appendix J   Maintenance of TOSHIBA RAI

 

J-12 [CONFIDENTIAL]

 

QOSMIO F30  Maintenance Manual (960-555) 

(3) Explanation of Main Menu 

The Independent Utility has following Main Menu. 

Table J-4  Item of Main Menu displayed 

 Explanation 

Create Array 

Builds RAID array. 

Start Rebuild 

Rebuilds RAID-1. While the rebuild is suspended, the message of 
“Resume Rebuild” is displayed. 

Check Media 

Checks if any error in drives configuring array. This is available for 
the RAID-1 in the “Optimal” condition. 

Modify Array 

Changes the setting of array. 

Delete Array 

Delete array. 

Physical Drive 

Changes the setting of physical drive. 

Exit 

Exits from the utility. 

 

CAUTION:  Do not use the following item of the Independent Utility for maintenance. 

    

[Create 

Array] 

This changes the current RAID configuration or information, and delete 
user’s data. Do not use for maintenance. 

   

 

[Start Rebuild (Resume Rebuild)] 

This changes the current RAID configuration or information, and delete 
user’s data. Do not use for maintenance. 

   

 

[Modify Array] 

This changes the current RAID configuration or information, and delete 
user’s data. Do not use for maintenance. 

   

 

[Check Media] 

This changes the current RAID configuration or information, and delete 
user’s data. Do not use for maintenance. 

   

 

[Delete Array] 

This changes the current RAID configuration or information, and delete 
user’s data. Do not use for maintenance. 

 

Summary of Contents for QOSMIO F30 Series

















































































































































































































































































































































































































































Reviews:

No comments