Home
/
Toshiba
/
QOSMIO F30 Series
/
Maintenance Manual

Toshiba QOSMIO F30 Series, Maintenance Manual, Page: 121 / 432

Share

Page: 121 / 432

Toshiba QOSMIO F30 Series Maintenance Manual Download Page 121

3.1 The Diagnostic Test

3 Tests and Diagnostics

QOSMIO F30 Maintenance Manual (960-555)

[CONFIDENTIAL]

3-1

3

3.1 The Diagnostic Test

This chapter explains how to use the Diagnostic Test programs to test the functions of the
computer’s hardware modules. The Diagnostics Programs are stored on some Diagnostic
Disks. There are Service Program Modules (DIAGNOSTIC MENU) and the Test Program
Modules (DIAGNOSTIC TEST MENU) on the Diagnostic Disk.

The Hardware Initial information Setting Tool consists of some programs that write the
hardware information or displays the current information of the computer. It is also included
in one of Diagnostic Disks.

The heatrun test is automatic test program that executes the some tests successively.

NOTE: Before starting the diagnostics, be sure to follow these steps:

1. Check all cables are connected firmly.

2. Exit any application and close Windows.

3. Check if [ALL Device] is selected in the “Device Config.” in SET UP menu.

After checking the diagnostics, be sure to select [Setup by OS] in the
“Device Config.”

3.1.1 Diagnostics

menu

The DIAGNOSTIC MENU consists of the following functions.

DIAGNOSTIC TEST

ONLY ONE TEST

HEAD CLEANING

LOG UTILITIES

RUNNING TEST

FDD UTILITIES

SYSTEM CONFIGURATION

EXIT TO MS-DOS

The DIAGNOSTIC TEST MENU contains the following functional tests:

SYSTEM TEST

MEMORY TEST

KEYBOARD TEST

DISPLAY TEST

FLOPPY DISK TEST

PRINTER TEST

ASYNC TEST

HARD DISK TEST

«
...
119
120
121
122
123
...
»

Summary of Contents for QOSMIO F30 Series

















































































































































































































































































































































































































































Reviews:

No comments