manualshive.com logo in svg

Toshiba QOSMIO F30 Series, Maintenance Manual, Page: 53 / 432

Share
Download
Toshiba QOSMIO F30 Series Maintenance Manual Download Page 53

2.3  Power Supply Troubleshooting 

2  Troubleshooting Procedures  

QOSMIO F30  Maintenance Manual (960-555) 

[CONFIDENTIAL] 

2-9 

Table 2-2  DC IN icon 

DC IN icon 

Power supply status 

Lights green 

DC power is being supplied from the AC adapter. 

Blinks orange 

Power supply malfunction

*1

Doesn’t light 

Any condition other than those above. 

 

*1  When the power supply controller detects a malfunction, the DC IN icon blinks 

orange. It shows an error code. 

When the icon is blinking, perform the following procedure. 

1.

 

Remove the battery pack and the AC adapter. 

2.

 

Re-attach the battery pack and the AC adapter. 

If the icon is still blinking after the operation above, check the followings: 

Check 1  If the DC IN icon blinks orange, go to Procedure 2. 

Check 2  If the DC IN icon does not light, go to Procedure 3. 

Check 3  If the battery icon does not light orange or blue, go to Procedure 4. 

NOTE:  Use a supplied AC adapter G71C00043310, G71C00058210, G71C0002R810 (2-

pin)/G71C00049410, G71C00049510, G71C0005S210, G71C00067210 (3-pin). 

Summary of Contents for QOSMIO F30 Series

















































































































































































































































































































































































































































Reviews:

No comments