manualshive.com logo in svg

Toshiba QOSMIO F30 Series, Maintenance Manual, Page: 424 / 432

Share
Download
Toshiba QOSMIO F30 Series Maintenance Manual Download Page 424

Appendices  

Appendix J   Maintenance of TOSHIBA RAI

 

Modify Array 

This option changes the setting of array. 

 

Change Parameter 

Select [Change Parameter] in [Modify Array] menu. The following items can be set. 

Table J-6  Item of array 

Option Explanation 

Write Cache 

Displays the setting of drive write cache. “Enable (use)” or 
“Disable (not use)” is displayed.  The default is “Enable (use)”. 

Degrade Bootup 

Displays if boot OS or not when the array is degraded. “Yes” (Boot 
up) or “No” (Not boot up) is displayed. The default is “Yes”. This 
option is displayed in RAID-1 (Mirroring). 

MBR Protection 

Displays the setting of protection function of MBR (Master Boot 
Record). “Enable” (Protect) or “Disable” (Not protect) can be 
selected.  The default is “Disable”. 

S.M.A.R.T. 

Displays the setting of failure prediction function of drive. 
 “Enable” or “Disable” is displayed.  The default is “Enable”. 

 

J-20 [CONFIDENTIAL]

 

QOSMIO F30  Maintenance Manual (960-555) 

Summary of Contents for QOSMIO F30 Series

















































































































































































































































































































































































































































Reviews:

No comments