manualshive.com logo in svg

Toshiba QOSMIO F30 Series, Maintenance Manual, Page: 142 / 432

Share
Download
Toshiba QOSMIO F30 Series Maintenance Manual Download Page 142

3 Tests and Diagnostics 

3.7 System Test 

3-22 

[CONFIDENTIAL] 

QOSMIO F30  Maintenance Manual (960-555) 

If the CPU supports Gerserville (SpeedStep), this Subtest checks that the CPU 
operating clock speed can be changed. 

If the CPU does not support Gerserville (SpeedStep), the following message is 
displayed and the test is ended. 

This chip is not supported 

Subtest 04 

Quick Charge 

This subtest checks the status for the quick charge. 

Subtest 05 

DMI read 

This subtest displays the information in the Flash-ROM in the following 
format. 

*** DMI Data Display Ver X.XX *** 

Model 

Name 

  : 

XXXXXXXXXXX 

Version Number 

: XXXXXXXXXXXX 

Serial Number  

: XXXXXXXX 

UUID Number 

 

: XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX 

Model Number   

: XXXXXX-XXXXX 

PCN/BND Number 

: XXXXXXXXXX 

Press [Enter] to EXIT 

To exit this subtest and return to the SYSTEM test menu, press 

Enter

.

Summary of Contents for QOSMIO F30 Series

















































































































































































































































































































































































































































Reviews:

No comments