manualshive.com logo in svg

Toshiba e-STUDIO FASTstart 200L, Operator'S Manual, Page: 64 / 316

Share
Download
Toshiba e-STUDIO FASTstart 200L Operator'S Manual Download Page 64

62

2.HOW TO MAKE COPIES

6.BYPASS COPYING (Cont.)

2

Bypass Copying on Standard Size Paper

1

Place paper on the bypass tray, and then 
align the guides with the size of the paper.

- When adjusting the width of the side guide, while holding down 

the knob of the side guide, slide the side guide.

- “Ready for bypass feeding” appears.
- Acceptable paper type for bypass copy "Acceptable Copy Paper 

Types and Sizes" 

 

 Page 35

- Place the paper with the side to be copied facing down.
- If you put several sheets on the bypass tray at a time, fan the 

paper well before placing it.

- Place the paper so as not to exceed the line indicated on the 

guides.

- Do not push the paper forcibly into the entrance of bypass 

feeding. It may cause a paper jam.

- Draw the triple paper holder depending on the paper size.
- Raise (B) before placing LD/A3 size or larger.

2

Place the original(s). 

3

Press the button that represents the size 
of the paper that has been set for LD, LG, 
LT and ST-R.

When the paper size is not specified, the copying speed may be 
lower due to the cleaning operation inside the copier.

(B)

Summary of Contents for e-STUDIO FASTstart 200L





























































































































































































































































































































Reviews:

No comments